Do you have used plantain slicer machine? Some customer ask us this question when visit our website, but i am sorry to tell you that we are a slicing machine manufacturer, and we only sell new
adjustable plantain chip slicer.
And we also advise you to buy new machines instead of used ones, because the old one has been used, you don't know what problems have occurred in the past. You don't know how long this machine has been used, you just know that used plantain slicer machines are cheaper. But it will generate more maintenance costs later, increasing your usage costs. As a manufacturer, we'd like to introduce you to our machines.
Machine composition: The machine is composed of rotary cutter, slicing board, automatic feeding device, automatic slicing system, built-in compressor, thickness adjusting knob, etc. The frame and housing are made of high quality stainless steel.
Principle: Set and adjust the thickness of the section as required, the material enters the feeding device and falls vertically on the chip plate. Cut the material evenly by rotating cutting knife automatically. And the machine will stop automatically when there is no material. It is an ideal device for banana slicing with high speed and uniform thickness.
Then we will share you some details about matters needing attention, these matters not only suitable for new machines, but also for used plantain slicer machine.
1. After each using, it shall be cleaned in time to ensure that it is clean and free of debris.
2. After starting the switch, observe at the entrance whether the cutter rotation is correct.
3. When the machine is working, stone or metal materials should not be put in to prevent damage to the cutter.
4. Test the machine before normal work, observe whether the vegetable cutting specification is consistent with the requirements, adjust it correctly before starting batch work.
5. After using the equipment for a period of time, check whether the screws in each part are loose or not. If there is any loose phenomenon, deal with it in time.
